Onsite Car Servicing, Audi, Jaguar, Honda, Land Rover, VW, Mercedes

Smart cars are among the most innovative and fuel-efficient vehicles these days. If you drive a smart car and live in the Berkshire area, it is important that you are well aware of the basic car servicing Bracknell procedures for this type of car. When servicing the car, make sure that you check the battery from time to time. If possible, it should be tested after every 20,000 mileage. Furthermore, the wiper blades, oil filter, as well as the engine oil should be replaced regularly as well. These servicing tips will not only apply on smart cars, but when doing Mercedes Benz and BMW servicing as well.

Replace the Battery

The first part of the servicing procedure is to replace the battery. So remove the carpet of your smart car and take out the foam insert. After that, slowly disconnect the battery from the ground line. You must also remove the cover of the battery and disconnect any cable that is responsible for the battery to function. Next remove the vent hose and then take the battery out as well. Finally, replace the new battery and substitute the vent hose with a new one as well. When doing this part of car servicing procedure of your smart car, you should make sure to place the cover of the battery and some other parts on their proper place or your smart car might operate. Finish it up by reconnecting the battery ground line and then returning the passenger carpet back.

Replace the Engine Oil as well as the Filter

Changing the engine oil and filter from time to time is not only necessary for Smart Cars, but for BMW and Mercedes Benz as well. So when using car service Bracknell companies, you have to make sure that you include this procedure. To do this, simply lift the carpet of the car and remove the engine cover. Take seal ring as well and then take the screw off. Remove the drain filter screen of the oil and then wipe it off with a clean rag. Unscrew the filter for the oil afterwards and allow the oil to drip towards the pan. Take note that when doing car servicing, you have to make use of clean oil and wet the sealing ring of your Smart car’s new oil filter. Afterwards, put back the new seal ring towards the drain screw. Finally, take the oil filter cap and then pour the oil towards the filter neck and then replace the neck cap of the oil filter.